Wdn 4800 driver windows 710/31/2023 ![]() ![]() ![]() The drivers for the card do not seem to be working, if i check it under devices i get "Qualcomm Atheros AR938x Wireless Network Adapter" and not any TP-LINK. The bandwidth i have available can reach up to 250mbit and does so on other devices. ![]() Win10 itself can find the card and use it for wifi, but the maximum speed i can get is 144mbit/s, and it only reaches maximum 60mbit if i use a speedtest service online. However, the drivers do not seem to work on win10. Also try ping 192.168.1.1 and you should get responses from the router.I have recently bought a TL-WDN4800 PCI Express Adapter for my stationary PC. The results should show that your network card has an IP address. Open a terminal window and type ifconfig.When your equipment connects, it should do so with addresses like 192.168.1.xxx. Since you say your computer sees the router, neither of these seem likely. Or, you don't have any networking services running on it. If your phone doesn't connect and your computer doesn't connect, there is likely something amiss with the router itself. Nice to use the phone to confirm that the network is actually up. Your computer should pick it up as a viable network and connect. The default config on the router should be IP 192.168.1.1 and it should be handing out addresses via DHCP. Reconnect power while holding the reset button for 30 seconds. Pull the plug while holding the reset button and leave power off for 30 seconds - don't release the reset button. While powered on, hold the reset button down for 30 seconds - don't release it. See your manual, but best is the 30/30/30 reset. This will ensure nothing esoteric is set in the configuration. Reset your router to its default factory settings. ![]()
0 Comments
Leave a Reply.AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |